Pico Profile

Pico-Profile Soil Moisture Probe from IMKO, Germany is an easy and modular instrument for the precise measurement of moisture and salinity in selected soil profiles. Using TRIME radar technology the Pico-Profile is ideal for research to control irrigation, to create soil and water balance models and to check the saline load in different soil depths.

 

Contact Van Walt

Advantages

  • Robust and watertight structure under extreme conditions
  • Every PICO-T3P PROFILE segment is in its celebration scalable on each soil horizon
  • Easy to configure modularly to measure selected soil horizons precisely
  • Up to ten measuring devices can be arranged in different soil depths
  • Additional measurement of the electrical conductivity for exact evaluations of saline load
  • Measuring result may be calculated for the pore water conductivity ECw or as TDS (in mg salt per liter water)
  • PICO-PROFILE measures per measuring segment 1dm³ soil and penetrates deeply into the soil around the installation tube with its representative measuring field
  • Attractive price-performance ratio
  • A RS485 or SDI12 interface allows data collection with the Van Walt Data Collection systems.
  • Long-life and durable.

Pico Profile

Call Van Walt
+44 (0) 1428 661 660 Call Van Walt
+64 (0)3443 5326 Call Van Walt
+27 21 518 1347

Pico Profile Equipment Options:

Applications

  • Irrigation Studies
  • Soil and Water Balance Models
  • Saline Monitoring in different soil depths

Specifications

Specifications
Technical Data
Measuring Segment PICO-T3PN
Power Supply
7 V – 24 V-DC
Power Consumption
100mA @12 V/DC during 2-3 seconds of measuring
Moisture Measuring Range
0 – 100% volumetric water content
Accuracy (in % volumetric water content)
±2%
Repeating Accuracy/Reproducability
<0.1%
Conductivity Measuring Range
ECW – 0 to >20 d/Sm
Measurement Volume
1dm3
Operating Temperature
-15 °C to 50 °C (Extended Temp range on request)
Calibration
Selectable Calibration Curves:
1. Standard Calibration (Soil ±3%)
2. Sand
3. Clay
4. Loam
5. Dielectric Permittivity
Probe Body
Waterproof Sealed PVC (IP62)
Size
210 x Ø 40mm
Access Tube
Tecanet Ø 44 mm, max. 3m length
Connection Tube set between two Pico-T3PN Segments
Made of aluminium & PVC. Incl. BCS6 male-connector & female connector.
Available lengths: 10cm, 30cm & 80cm, special lengths on request.
Interfaces
IMP-BUS or SDI-12
R485 on request
Cable
2m, 5m & 10m cable with 4-pin female connector

Resources

Manuals & Downloads

Related Equipment

Hand-held SONO-DIS Read-Out Meter

The compact Hand-held SONO-Dis Read-out Meter from Imko, Germany works with the SONO-WZ Concrete Sensor and SONO-M1 Aggregate Sensor. The clear display shows the measuring parameters of the connected sensor...

Read More

Be-spoke Soil Moisture Networks

Be-spoke Soil Moisture Networks from Van Walt gives access to your soil moisture data from site, directly to your PC, tablet of phone, couldn’t be easier.

Read More

GroPoint Profile

GroPoint Profile is a multi-segment Soil Moisture Profiling Probe. Used for the cost-effective measurement of volumetric water content over multiple depths. Because it uses a single probe it simplifies...

Read More

Have a question for Van Walt?

Please complete the form below; a member of our team will contact you shortly

Oops! Something went very wrong. Please refresh and try again...
+44 (0) 1428 661 660 +64 (0)3443 5326 +27 21 518 1347