PT2X Pressure & Temperature Sensor

The PT2X Pressure & Temperature Sensor. Highly accurate water level sensor. So used for observing flow patterns, testing pumps and monitoring groundwater. Versatile, highly accurate sensor  records water level and temperature. With integrated datalogger so collects up to 520,000 records. Easy to use software. Most importantly can be connected to other sensors. Thermally compensated for volatile conditions. Therefore ideal for wells, tanks, tidal studies and any application where ‘mm’ accuracy is important.

Contact Van Walt

Advantages

Overall

  • Several Versions Available: Absolute, gauge or sealed gauge versions
  • Choice of Logging Capabilities: 130,000, 260,000 or 520,000 records

Sensor

  • Constructed from 316 stainless steel, fluoropolymer and PTFE (titanium optional) to provide highly accurate readings in rugged and corrosive field conditions
  • Measures pressure, temperature and time
  • Available as a vented system
  • Thermally compensated for a wide range of water temperatures variations
  • Low power requiring just two internal AA batteries
  • External power options (12 VDC) with AA’s acting as backup
  • Available for both Modbus® and SDI-12 protocols
Read More

PT2X Pressure & Temperature Sensor

Call Van Walt
+44 (0) 1428 661 660 Call Van Walt
+64 (0)3443 5326 Call Van Walt
+27 21 518 1347

PT2X Pressure & Temperature Sensor Equipment Options:

Applications

  • Wetland monitoring
  • Well, tank, tidal levels
  • River, stream, reservoir gauging
  • Stormwater runoff monitoring
  • Resource administration
  • Pump and slug tests

Specifications

GENERAL
Length w/batteries
12.18″ (30.9cm)
Length w/o batteries
8.37″ (21.3cm)
Cableles
0.25″ (0.6cm) shorter
Diameter
0.75″ (1.9 cm)
Weight
0.8 lb. (0.4 kg)
Body Material
Acetal & 316 stainless steel or titanium
Wire Seal Material
Fluoropolymer and PTFE
Submersible Cable
Polyurethane, polyethylene or FEP available
Protection Rating
IP68, NEMA 6P
Desiccant
1-3 mm indicating silica gel (high or standard capacity)
Terminating Connector
Available
Communication
RS485 Modbus® RTU
SDI-12 (ver.1.3)
Direct Modbus Read Output
32-bit IEEE floating point
SDI-12 Output
ASCII
Operating Temp. Range3
-15° C to 55° C
Storage Temp. Range1
-40° C to 80° C
LOGGING
Memory
4MB – 520,000 records
Log Types
Variable, user-defined, logarithmic, profiled
Programmable Baud Rate
9600, 19200, 38400
Logging Rate
8x/sec maximum
Software
Complimentary Aqua4Plus or Aqua4Push
Networking
32 available addresses per junction w/ batching capabilities (up to 255)
File Formats
.xls / .csv / .a4d
POWER
Internal Battery
2×1.5V AA alkaline2
Auxiliary Power
12 VDC – Nominal
6-15VDC – Range
Exp. Alkaline Battery Life
18 months at 15m polling interval6
TEMPERATURE
Element Type
Digital IC on board
Accuracy
± 0.5° C
Resolution
0.1° C
Range
-40° C to 80° C
Units
Celsius, Fahrenheit, Kelvin
PRESSURE
Transducer Type
Silicon strain gauge
Transducer Material
316 stainless steel or titanium
Pressure Ranges 5

Gauge

  • PSI: 18, 5, 15, 30, 50, 100, 300
  • FtH2O: 2.38, 12, 35, 69, 115, 231, 692
  • mH2O: 0.78, 3.5, 10.5, 21, 35, 70, 210

Absolute7

  • PSI: 30, 50, 100, 300
  • FtH2O: 35, 81, 196, 658
  • mH2O: 3.5, 10, 24, 59, 200
Units
PSI, FtH2O, inH2O, cmH2O, mmH2O, mH2O, inHg, cmHg, mmHg, Bars, mBars, kPa
Static Accuracy
± 0.05% FSO (typical)
(B.F.S.L. 20°C)
Resolution
0.0034% FS (typical)
Maximum Operating Pressure
1.1 x FS
Burst Pressure4
3.0 x FS
Compensated Range
0°C to 40°C

Resources

Videos

Manuals & Downloads

Related Equipment

BaroSCOUT

BaroSCOUT logger records and monitors atmospheric pressure. Barometrically compensates water level logger readings. So you get accurate water level measurements.

Read More

Water Level Meters

Water Level Meters designed to provide reliable and accurate measurements of groundwater level. Used in boreholes, monitoring wells, tanks and for surface water. Highly accurate polyethylene coated steel...

Read More

StarFlow QSD Flow Meter

Monitoring water velocity, depth and temperature of water flowing in rivers, streams, open channels and large Pipes, the Starflow QSD uses this information to calculate flow rate and total flow.

Read More

Have a question for Van Walt?

Please complete the form below; a member of our team will contact you shortly

Oops! Something went very wrong. Please refresh and try again...
+44 (0) 1428 661 660 +64 (0)3443 5326 +27 21 518 1347