ATEX Certified Interface Meters
To detect hydrocarbons Van Walt’s ATEX Certified Interface Meter available in 30 m and 60 m lengths. Therefore ideal in wells & boreholes in landfill, remediation and petrochemical industries. With LNAP and DNAPL detection for monitoring groundwater and boreholes.
Contact Van Walt
Advantages
ATEX certified zone 0
Safe detection
Simple to operate
Portable and lightweight
Accurate measurement
Sealed electronics
Narrow diameter probe for use in most wells
Buzzer and light indicator
Rugged, field-ready construction
Detect hydrocarbons
ATEX Certified Interface Meters Equipment Options:
Contaminated land
Remediation projects
Brownfield sites
Storage tank dipping
Version
IM1.1-30 / IM1.1-60 / IM1.1-100
Method of operation
Manual use of tape / probe. Lower tape into well to achieve audible tone and visual light display on contact with product or water.
Peripheral Ports
1 power communication port
Dimensions & Weight
H 340 mm, W 250 mm, D 200 mm
Tape weight per 30 mm
1.28 kg
Tape
– Millimetre graduations
– Kynar jacketed tape
– Breaking load of 120 kg
Available lengths
30m, 60m, & 100m
Operating temperature
-20°C to +40°C
Power source
9V Battery (must be Duracell MN 1604)
Tape accuracy
EC Class II standard
ATEX Certified Interface Meters
Specifications
Version
IM1.1-30 / IM1.1-60 / IM1.1-100
Method of operation
Manual use of tape / probe. Lower tape into well to achieve audible tone and visual light display on contact with product or water.
Peripheral Ports
1 power communication port
Dimensions & Weight
H 340 mm, W 250 mm, D 200 mm
Tape weight per 30 mm
1.28 kg
Tape
– Millimetre graduations
– Kynar jacketed tape
– Breaking load of 120 kg
Available lengths
30m, 60m, & 100m
Operating temperature
-20°C to +40°C
Power source
9V Battery (must be Duracell MN 1604)
Tape accuracy
EC Class II standard