SONO-M1 Aggregate Sensor

The SONO-M1 Aggregate Sensor from Imko, Germany uses Trime Domain Reflectrometry (TDR) to determine the moisture content of aggregates. It is very accurate and quickly shows results. The handy two-rod probe measures moisture in sand, gravel, expanded clay spheres and other aggregates. Moisture measurements can be displayed using the Hand-held SONO-Dis Read-out Meter or the Pico HD2 Meter.

Contact Van Walt

Applications

Construction
Road Building
Nuclear
Rail
Infrastructure Development

Specifications

Power Supply

7V …24V-DC

Current Consumption

100mA @12V/DC

Measuring Range

0 ….40% vol

Accuracy (% volume in water)

± 0.2%

Conductivity Range

0.5dS/m

Repeat Accuracy

± 0.3%

Temperature Drift

± 0.3%

Material Temperature Range

-15oC ….. 50 oC

Measuring accuracy of material temperature

±0.5 oC (with permanent installation)

Measuring Volume

1 L = 130 x 100 mm diameter

Temperature Range of Probe

-15oC ….. 50 oC

Calibration

Calibrated for Sand, Gravel & Aggregate
Up to 15 bespoke calibrations available

Probe Body

IP68

Probe Dimensions

155 x ⌀ 63 mm

Probe Length

130 mm

Probe Diameter

6 mm

Interfaces

1.5 m Cable with 7-pin coupling socket

Resources

Manuals & Downloads

Moisture Measurement Technology

Related Equipment

PICO-BT Control & Read-Out Unit

The PICO-BT is an innovative solution for the mobile control and read out of your IMKO soil moisture sensors using Bluetooth Technology©.

SONO-WZ Concrete Sensor

SONO-WZ Concrete Sensor from IMKO, Germany, analyses water & cement in fresh concrete. It gives fast, accurate results within 1 or 2 minutes of testing onsite. The sensor defines the water content...

Pico HD2 Meter

Pico HD2 Meter is the mobile reading device for Pico Soil Moisture Probes. Easy to use and mobile solution for soil moisture measurement. Control the quality of your soil on site with accurate and clear...

SONO-M1 Aggregate Sensor

Advantages