BaroSCOUT

BaroSCOUT logger records and monitors atmospheric pressure. Barometrically compensates water level logger readings. So you get accurate water level measurements.

Contact Van Walt

Advantages

  • A datalogger that accurately measures and records barometric pressure and temperature
  • Easy, straightforward barometric compensation
  • Low power so battery lasts at least 4 years
  • Great flexibility with Modbus® RTU (RS485) protocols
  • No desiccant tubes, bellows or vent tubes required
  • Latest technology that incorporates and improves on recognised groundwater data logger equipment
  • More exact with ± 0.05% FS accuracy
  • Small 2.22cm (0.875″) diameter
  • Stores 50,000 records with a non-volatile memory to eliminate data loss in the event of a power failure
  • Ability to connect wirelessly

BaroSCOUT

Call Van Walt
+44 (0) 1428 661 660 Call Van Walt
+64 (0)3443 5326 Call Van Walt
+27 21 518 1347

BaroSCOUT Equipment Options:

,

Specifications

GENERAL
Length (cabled version)
16.7cm (6.6″)
Length (cableless version)
12.9 cm (5.1″)
Diameter
2.22cm (0.875″)
Body Material
316 stainless steel
Wetted Materials
316 stainless steel, acetal, fluoropolymer
Communication
RS485 Modbus® RTU
Direct Modbus Read Output
32-bit IEEE floating point
Internal Math
32-bit floating point
Operating Temp. Range
-20° C to 60° C
Storage Temp. Range
-40° C to 80° C
LOGGING
Memory
50,000 records
Logging Rate
1 x per second
Software
Complimentary Aqua4Plus Software
File Formats
.xls / .csv / .a4d
POWER
Internal Battery
One 1/2 AA 3.6 lithium battery
Expected Battery Life
4.5 years (depending on use)
TEMPERATURE
Element Type
Thermistor
Accuracy
± 0.1° C (from -20° C to 60° C)
Resolution
0.01° C
Units
Celsius, Fahrenheit, Kelvin
PRESSURE (Level)
Transducer Type
Silicon strain gauge
Transducer Material
316 stainless steel
Units
PSI, FtH2O, in H2O, cmH2O, mmH2O, mH2O, inHg, cmHg, mmHg, Bars, mBars, kPa
Accuracy
± 0.008% PSI (0.55 mbar) @ 20° C
± 0.015% PSI (1.03 mbar) @ 20° C to 60° C
Resolution
0.0034% FS (typical)
Maximum Operating Pressure
1.1 x FS
Over Range Protection
3 x FS
Burst Pressure
600 psi (approx. 410 m or 1350 ft)
Note: Intended for use in atmosphere – not to be submerged.

Resources

Videos

Manuals & Downloads

Related Equipment

Oil Interface Meters

Detect hydrocarbons in wells & boreholes with Van Walt's Oil Interface Meters. Highly accurate so will detect layers as thin as 1.52 mm. Fits in a 19 mm diameter well. Uses a 16mm probe to detect...

Read More

DFM 6.1 Doppler Flow Meter

The DFM 6.1 Doppler Flow Meter from Pulsar Measurement accurately measures the flow rate of ‘complex’ fluids with suspended solids or entrained air. This clamp-on, ultrasonic non-contacting, flow meter...

Read More

TTFM 6.1 Transit-Time Flow Meter

The TTFM 6.1 Transit-Time Flow Meter from Pulsar Measurement accurately measures the flow rate of fluids in full pipes. This clamp-on, ultrasonic flow meter measures flow from outside a pipe with no contact...

Read More

Have a question for Van Walt?

Please complete the form below; a member of our team will contact you shortly

Oops! Something went very wrong. Please refresh and try again...
+44 (0) 1428 661 660 +64 (0)3443 5326 +27 21 518 1347