Geosub 2 Pump & Controller System

Advantages

Unique pump system with no comparable competitors for groundwater monitoring
System CE Certification
A high-quality, rugged, reliable & versatile pump
One year Manufacturer’s Warranty
Rugged construction and easy to connect cables for quick & simple setup and portability
Low flow or high flow options
Suitable for PFAS sampling
Pump to 60 m head of water or can go deeper with drop tube assembly

Monitoring well installation
Water quality research
Monitoring water quality
Water sampling
Ground water sampling
High and Low flow purging and sampling
PFAS sampling

Specifications

Pump

Wetted Parts

316 Stainless steel, PEEK, HDPE

Electric

Full Load Rating

2/3 HP

Maximum Amp Draw

10 amps DC

Overload

Incorporated into Geosub 2 Controller

Discharge Port Connection

1/4″ female NPT (includes 3/8″ barb)

Dimensions & Weight (Pump & Motor):

Dimensions of Pump

34cm L x 4.5cm OD (13.2″ L x 1.75″ OD )

Net Weight of Pump w/o Lead

1.8 kg (4 lbs.)

Cable

Material

Two 12 gauge conductors with HDPE jacket, and integrated safety cable

Weight with Geo Reel & Safety Cable

100′ (30.5 m) of 12 AWG & Safety Cable

8.3 kg (18.3 lbs.)

150′ (45 m) of 12 AWG & Safety Cable

9.8 kg (21.6 lbs)

200′ (61 m) of 12 AWG & Safety Cable

11.3 kg (24.9 lbs.)

Controller

Input Power Range

100-130 Volts AC
50/60 HZ 310 Watts
4.2 amps nominal full load 115 Volts AC

200-250 Volts AC
50/60 HZ 310 Watts
2.1 amps nominal full load 230 Volts AC

Output Power

Variable 0-46V DC @ <300 Watts

Output Power @Maximum Voltage

10 amps maximum

Operating Temperature

-29°C to 38°C (-20°F to 100°F) ambient air temp.

Humidity

Up to 90% humidity

Weight of Unit

7.46 kg (16.45 lbs.)

Size of Unit

41cm L x 33cm W x 18cm H (16″ L x 13″ W x 7″ H)

Input Protection

5A CB

Certification

Accessories

DC to AC Inverter

Drop Tube Assembly

Tubing

Resources

Videos

Manuals & Downloads

Related Equipment

Snap Sampler

The Snap Sampler suits most groundwater monitoring & sampling situations. A passive type sampler so is particularly helpful in difficult conditions such as with low yield wells

vanwaltKISS – XS

vanwaltKISS - the Keep It Simple Sensing system is now available with our 16mm narrow diameter Keller sensor to monitor water level and temperature. This makes this logger a unique and accessible solution...

MP1 Pump

The MP1 Pump is an electric impeller driven pump. For precise and smooth control of water flow it is controlled by a Variable Frequency Drive (VFD). High flow rates for purging, low flow rates for sampling....

Geosub 2 Pump & Controller

Advantages