MP1 Pump

The MP1 Pump is an electric impeller driven pump. For precise and smooth control of water flow it is controlled by a Variable Frequency Drive (VFD). High flow rates for purging, low flow rates for sampling. So the MP1 Pump is ideal for most groundwater sampling and the high flow purging of deep wells

Contact Van Walt

Advantages

The MP1 is the perfect groundwater sampling or aquifer test pump, controlled by a Variable Frequency Drive (VFD) with precise and smooth control of water flow from 0.1 litres per minute to 34 litres per minute – high flow rates for purging, low flow rates for sampling. The MP1 fits wells of 50 mm (2″ diameter) and is capable of pumping to a depth of 90 metres. This pump can be damaged by (suspended) sediments or sand so is not ideal for well development in these conditions. The MP1 Pump requires 110V generator or mains supply.

Please call on +44 (0)1428 661 660 to discuss your Installation

  • High pumping capacity for purging, slow pumping for sampling
  • Pumps to up to 90m head of water in 50 mm (2 inch) diameter or larger wells
  • Easy to install
  • Step-less control for flow rates from 100ml to 34 litres per minute
Read More

MP1 Pump

Call Van Walt
+44 (0) 1428 661 660 Call Van Walt
+64 (0)3443 5326 Call Van Walt
+27 21 518 1347

MP1 Pump Equipment Options:

,

Applications

  • Monitoring well installation
  • Water quality research
  • Monitoring water quality
  • Anaerobe sampling
  • Water sampling
  • Ground water sampling

Specifications

Technical specifications
Dimensions (Pump & Motor)
11.3″ L x 1.81″ D (28.7cm L x 4.6cm D)
Net Weight (Pump & Motor)
5.5 lbs. (2.5 kg), excluding motor lead
Full Load Rating
0.5 HP/220V/3 PH/400 Hz/5.5A
Well size
Fits wells of 2 inch diameter
Power supply
110V Generator
Maximum Current (SFA)
5.5 amps
Pumps down to
90m
Minimum Ambient Fluid Temperature
32°F (0°C)
Maximum Ambient Fluid Temperature
95°F (35°C)
Product material
Stainless steel
Motor Lubricating Fluid
Deionized (DI) Water
Flow rate
34 Litres per minute
Tubing required
12x16mm Polyethylene discharge tubing
Power cord
Teflon coated
Motor Protection Thermal overload
Current Overload Incorporated into MP 1 frequency convertor

Accessories

Polyethylene Tubing
Hallmarked and carries our QA plus stamp of purity and cleanliness. It is ideal for sampling for trace metal; Hydro-carbons; Volatiles and Macro-parameters analysis.

Resources

Videos

Manuals & Downloads

Related Equipment

Geosub 2 Pump & Controller

The Geosub 2 Pump & Controller system is a versatile, stainless steel, pumping solution. A DC pump for low flow sampling and high flow well purging. Robust and tested design with stainless steel components...

Read More

Groundwater Sampling Bailers

Groundwater Sampling Bailers offer a quick and easy method of purging and sampling. Bailers are a useful addition to your groundwater equipment collection because they are good value and easy to use

Read More

Submersible Gigant Pumps

Submersible Gigant Pumps are an impeller type pump. Designed to fit groundwater monitoring wells with a minimum of 40 mm diameter so suitable for most groundwater monitoring

Read More

Have a question for Van Walt?

Please complete the form below; a member of our team will contact you shortly

Oops! Something went very wrong. Please refresh and try again...
+44 (0) 1428 661 660 +64 (0)3443 5326 +27 21 518 1347