Water Level Meters

Advantages

Audible and visible alarms activated when the probe makes contact with water. Adjustable sensitivity to maximise efficiency with robust construction for the accurate detection and measurement of water level in the most rugged of field conditions.

Simple, fast and easy to use
Robust construction and light weight
Available in 30m, 50m, 60m and 100m lengths and longer to order
Audible and visible alarms activated on reel when probe contacts water
No disturbing parts when inserted into a borehole
Variable cable lengths from 5 to 1,000 m
15 mm diameter probe.

Applications

Water level measurements of electrically-conducting liquids in boreholes, wells and tanks (in ATEX- free zones only)
Long-term observations for periodic level soundings
Continuous water level registration during pumping tests
Additional sounding of well depths using the bottom sensor (accessory)

Options

Available in 4 styles

Type 10 on Plastic Frame

Type 25 on Metal Frame

Type 15 Handheld, no Frame

Type 20 Mini Handheld, no Frame

Depth Indicator

Specifications

Dip Meters

Measuring probe materials

Stainless steel and electroplated brass, easy to clean

Measuring probe dimensions

Ø 15 mm, length 195 mm; Ø 12 mm, length 70 mm

Power supply

4 x 1.5 V batteries / size C; 1 x 9 Volt

Operating temperature range

-30 °C up to +75 °C

Recommended storage temperature

+5 °C up to +30 °C, for battery protection

Safety class for probe

IP 68, permanently pressure resistant

Safety class measuring tape drum

IP 64, spray water resistant

Measuring tape

– Bifilar strip made of white polyethylene with 2 stainless steel wires
– Resistant to ultraviolet rays and to contaminated or salt water
– Metres printed in red; cm divisions and dm figures in black

Depth Indicator

Measuring cable

– Galvanized steel, diameter 2mm
– Special version with stainless steel 316
– Consecutive numeration engraved on the brass marks either every 1 metre or 5 metres

Measuring ranges

– The following cable lengths are available as standard: 50 m / 100 m / 150 m / 200 m / 250 m / 300 m / 500 m / 750 m / 1000 m
– Special lengths on request

Sounding line weight

– Stainless steel, diameter 34mm. length 130mm / up to 200 m length of measuring cable
– Stainless steel, diameter 34mm. length 170mm / from 200 m length of measuring cable

Accessories

– 12050060 Leader guard – protects tape from sharp well edges
– Bottom sensor available for additional sounding of drilling depth
– 10mm probe, length 140mm

Resources

Manuals & Downloads

Related Equipment

Oil Interface Meters

Detect hydrocarbons in wells & boreholes with Van Walt's Oil Interface Meters. Highly accurate so will detect layers as thin as 1.52 mm. Fits in a 19 mm diameter well. Uses a 16mm probe to detect...

ATEX Certified Interface Meters

To detect hydrocarbons Van Walt’s ATEX Certified Interface Meter available in 30m, 60m, 100m and 150m lengths. Ideal in wells & boreholes in landfill, remediation and petrochemical industries. With LNAP...

Advantages