vanwaltKISS – XS
vanwaltKISS – the Keep It Simple Sensing system is now available with our 16mm narrow diameter Keller sensor to monitor water level and temperature. This makes this logger a unique and accessible solution for those 19mm wells. KISS-XS uses a sensor that is offered with vented cable, so no barometric compensation is required.
Contact Van WaltAdvantages
- Suitable for 19mm wells
- Logs water level and temperature
- Easy to deploy
- A true plug-and-play environmental data telemetry system
- Cable lengths up to 30 metres included (50m available on request)
- Vented cable so no baro required
- Rental option available
- Subscription free
vanwaltKISS – XS Equipment Options:
,
Applications
- Environmental research
- Groundwater monitoring projects & site assessments
- Tidal studies
- Groundwater monitoring network automation
- Watershed, drainage basin and recharge areas
- Stream gauging, lake levels and reservoirs
- Wetlands monitoring
- Storm water run-off monitoring
- Environmental monitoring
- Aquifer level monitoring
- Aquifer storage & recovery
- Flood risk monitoring
- Wetland and Peat Bog monitoring & surveys
- Final outflow monitoring for groundwater remediation projects
Specifications
Connector at the top of the cable, IP68 with integrated cable strain relief. Connector acts as ON/OFF switch
Cable can be shortened
Temperature (water)
EC (option)
System Voltage
.csv format file
– File/Unit identifier
– Date and time stamps
– Sensor Data
Data viewable and downloadable from the server
Email notification when new data is Available
Product should only be used with the Battery supplied
Battery is not suitable for charging
Supply voltage: 3.6 V
Power rating – Peak 1.5A
Integral antenna
POD roaming data SIM (works in most countries)
– 88 mm diameter to fit securely on top of a 1” to 3” well
– 150 mm to 170 mm Height (height reduces as well diameter increases)
– 1.3 kg (without sensor)
– Powder coated stainless steel 304
– Tapered to auto-centre on well from 1” and larger
Bespoke Lithium battery with integrated super capacitor with a minimum life of 24 months
Easy way to switch on/off with multi-coloured LEDs confirming diagnostic and “Ready” to deploy light by connector
– Intuitive to use
– Minimal training required
API Enabled
Replace battery
Reactivate SIM
Verify sensor
Re-issue 2-year warranty
Accessories
Resources
Related Equipment
Snap Sampler
The Snap Sampler suits most groundwater monitoring & sampling situations. A passive type sampler so is particularly helpful in difficult conditions such as with low yield wells
Read MoreSubmersible Gigant Pumps
Submersible Gigant Pumps are an impeller type pump. Designed to fit groundwater monitoring wells with a minimum of 40 mm diameter so suitable for most groundwater monitoring
Read MoreGeosub 2 Pump & Controller
The Geosub 2 Pump & Controller system is a versatile, stainless steel, pumping solution. A DC pump for low flow sampling and high flow well purging. Robust and tested design with stainless steel components...
Read More