Snap Sampler

The Snap Sampler suits most groundwater monitoring & sampling situations. A passive type sampler so is particularly helpful in difficult conditions such as with low yield wells

Contact Van Walt

Advantages

The Snap Sampler seals groundwater samples down well, in bottles that can then be directly analysed in a laboratory. The sample is never exposed to the open air and collection of the sample does not require pumps, controllers, meters and purge water waste containers. It is quick and easy to collect the samples and so can save money on sample collection costs.

The Snap Sampler with 40ml and 125ml bottles fits in 2-inch or larger monitoring wells. With 350ml bottles the sampler will fit in 4-inch or larger monitoring wells.

Snap Sample bottles are loaded into the Snap Samplers, set open, deployed for a period of time — usually all the way between sampling events — are “snapped” shut downhole, retrieved, secured, and sent to a lab without opening them.

Read More

Snap Sampler

Call Van Walt
+44 (0) 1428 661 660 Call Van Walt
+64 (0)3443 5326 Call Van Walt
+27 21 518 1347

Snap Sampler Equipment Options:

Applications

  • Hydrological research
  • Long term groundwater sampling
  • Groundwater monitoring projects
  • Groundwater site assessments
  • Watershed, drainage basin and recharge areas
  • Tidal studies
  • Estuary and wetlands monitoring
  • Leachate & pollutant monitoring
  • Environmental monitoring
  • Aquifer monitoring
  • And more…

Specifications

Input Power
Pneumatic System:
12V Air Pump
Trigger Activating Pressure:
10-30 PSI (.69-2 bar) – typical
Pressure Block:
Includes fittings and gauge for applying pressure from pump to pneumatic actuator
Snap Sampler Specifications
Maximum Operating Pressure1:
80 PSI (5.5 bar)
Minimum Operating Pressure1:
~10 PSI (~.69 bar)
Maximum Sampling Depth:
2,500 ft. (609 m)
Capacity:
Up to 6 Snap Samplers in any combination can be “stacked” with one actuator
Operating Temperature:
0° to 100°C
Input Protection:
Pressure Block has 80 PSI (5.5 bar) relief valve
Weight
40 ml Snap Sampler:
3 oz. (85 g) – each, empty
125 ml Snap Sampler:
3 oz. (85 g) – each, empty
Pneumatic Actuator:
13 oz. (368 g)
Stainless Steel Weight:
3.1 lb. (1.4 kg) – optional
Length
40 ml Snap Sampler:
8 in.(20 cm)
125 ml Snap Sampler:
10.5 in. (26.7 cm)
Pneumatic Actuator:
11 in. (27.9 cm)
Outer Diameter
40 ml Snap Sampler:
1.7 in. (4.3 cm)
125 ml Snap Sampler:
1.85 in. (4.7 cm) – with 125 ml bottle
350 ml Snap Sampler:
3.4 in. (8.6 cm) – with 350 ml bottle
Min. Well I.D
40 ml Snap Sampler:
2 in. (5 cm)
125 ml Snap Sampler:
2 in. (5 cm)
350 ml Snap Sampler:
4 in. (10 cm)
Material
Material:
Acetal

Resources

Video

Manuals & Downloads

Have a question for Van Walt?

Please complete the form below; a member of our team will contact you shortly

Oops! Something went very wrong. Please refresh and try again...
+44 (0) 1428 661 660 +64 (0)3443 5326 +27 21 518 1347