Keller Surface Level Sensor

Keller PR-46 X Surface Level Sensor for accurate measurement of surface water. This Swiss made sensor combines high precision and reliability. Accuracy as a result of a ceramic measuring cell for low pressure ranges and µP-electronics for level monitoring. 10 m of Kevlar Cable is supplied with every sensor. Also Keller PR-46 X sensors are compatible with Van Walt telemetry. Therefore Keller PR-46X water level sensors deliver high accuracy for surface water level monitoring. So is a the preferred choice for monitoring surface water. High precision and reliability from Europe’s leading manufacturer of pressure transducers.

 

Contact Van Walt

Advantages

  • Compatible with Van Walt telemetry (vanwaltCONNECT; vanwaltDataHub & vanwaltDataSlave)
  • Supplied with 10 m of vented Kevlar Cable so no barometric compensation required
  • Available from stock with Modbus connection
  • High accuracy
  • Manufactured according to ISO 9001:2008
  • Precise ceramic measuring cell
  • Outstanding reliability
  • Easy to deploy
  • Easy to use
  • Other connection protocols available
  • An intrinsically safe option is available for explosion exposed areas
  • Un-rivalled quality and performance that is synonymous with Swiss engineering.

Keller Surface Level Sensor

Call Van Walt
+44 (0) 1428 661 660 Call Van Walt
+64 (0)3443 5326

Keller Surface Level Sensor Equipment Options:

,

Applications

  • Waste Water applications
  • High accuracy flood monitoring
  • Long term water level & temperature monitoring
  • Tidal studies
  • Watershed, drainage basin and recharge areas
  • Stream gauging, lake levels and reservoirs
  • Wetlands and storm water run-off monitoring
  • Environmental monitoring
  • Surface water discharge measurement
  • Aquifer level monitoring
  • Aquifer storage & recovery

Specifications

Dimensions
Length: 62.5 mm
Diameter: 38 mm
Ranges (FS)*
3m
Type
2-Wire
3-Wire
Supply
8…28 VDC
13…28 VDC
Signal Output (scaleable)
4…20 mA
0…10 V
Load (K Ω)
<(UB-UBmin.) / 20 mA
>e;100
Error Band typ.**
± 0.1 %FS
± 0.2 %FS
Error Band max.**
± 0.2 %FS
± 0.3 %FS
Stability
>e; 100 mbar: ± 0.1 %FS
FS <e; 100 mbar: ± 0.1 mbar
Operating Temperature
0…80 °C
Compensated Range
10…50 °C
Electrical Connection
– Reference cable PE sheath Ø 5.8
– Absolute cable PUR double sheath Ø 4.7
– Cable length: Standard 5m
Materials
-Housing: Stainless steel (type AISI 316L)
-Diaphragm: Ceramic, gold plated
– Nitrile O-ring
Protection
IP 68
Weight
≈ 400 g with 5 m cable

**within the compensated temperature range

Resources

Manuals & Downloads

Have a question for Van Walt?

Please complete the form below; a member of our team will contact you shortly

Oops! Something went very wrong. Please refresh and try again...
+44 (0) 1428 661 660 +64 (0)3443 5326