New Base Plates for more accurate water quality sampling
April 1, 2016
In response to our recent update about water quality flow cells Lewis has broken out his favourite toys (laser cutter and TIG welder) to make some base plates for your YSI water quality meters. And they look good and work well even if he does say so himself!
These plates screw onto the bottom of most YSI flow cells. We will be adding them to our rental cases so look out for them in the bottom of the case or behind the foam of the case lid.
If you wish to buy one for your own YSI flow cell please contact Amanda for details.
You might also be interested in...
Van Walt Guidelines for sampling for PFAS in Groundwater
November 13, 2024We need to make clear, that at the time of writing, there are no ISO or EN standards which deal with the sampling of groundwater for PFAS.
Read MoreSpot measurement v. continuous environmental monitoring
August 25, 2023Environmental monitoring has developed considerably over the years. From the time when a consultant went out monthly or quarterly with a dip tape to monitor the groundwater level in a borehole, wind forward...
Read MoreMeasuring Nitrates (NO3, NO3-N) in the field
June 20, 2023The interest in Nitrates is nothing new. One way or another we have been measuring them for half a century.
Read MoreVan Walt Environmental Equipment
A small selection of our environmental equipment