Passive Sampling Survey: Results

October 28, 2016

Thank you to everyone who took part in our recent passive sampling survey, your feedback has given us a much better understanding of the knowledge and perception of this sampling method in the groundwater sector. The results are available here but highlights include:

  • The majority of participants at 80%, are aware of and familiar with passive sampling techniques
  • 60% have not used this method of groundwater sampling
  • The preferred method of groundwater sampling is low-flow purging at 80%
  • Over half of those surveyed (53%) cite low-recharge wells as being problematic
  • 20% of survey responders admitted they experience unexplained variability between sampling results
  • On average, survey participants said 33% of their overall budget comprises of sampling costs alone
  • 32% confirmed that the average duration of a groundwater project is 5 years or longer
  • 74% of sampling events are repetitive with a sample collection frequency of 3 months
  • Only 9% from the survey specified that their method of sampling was determined by the regulator
  • The majority said they continue with their current monitoring technique due to sampling history at the site, familiarity with their device or they already have the equipment.

For us we believe that the findings of the survey indicate that by encouraging a greater take-up of passive sampling methodologies our customers could ensure less variability in their groundwater sampling events and so more accurate results; more effectively sample low-recharge wells and, for appropriate sites, experience substantial cost savings.
It seems, from what you told us, the only thing preventing wider use of passive sampling techniques is the environmental community itself. We are therefore on a mission to gently help you change your minds!

To see what the costs are for our preferred passive sampling equipment: the Snap Sampler, our latest brochure has costings for different sample scenarios. You can get a copy by calling us on 01428 661 660 or email sales@vanwalt.com.

A lot of equipment with the traditional sampling method

snap-sampler-old

Very little equipment with the Snap Sampler

snap-sampler-new

 

You might also be interested in...

Spot measurement v. continuous environmental monitoring

August 25, 2023

Environmental monitoring has developed considerably over the years. From the time when a consultant went out monthly or quarterly with a dip tape to monitor the groundwater level in a borehole, wind forward...

Read More

Measuring Nitrates (NO3, NO3-N) in the field

June 20, 2023

The interest in Nitrates is nothing new. One way or another we have been measuring them for half a century.

Read More

Save time, save money, save effort, get better results – use low-flow sampling…

June 1, 2023

A client recently contacted me to ask if we can repair their high flow purge pump and or sell then a new one.  They were using it for (among other applications) to purge a 70m deep bore 3 times for a...

Read More